01

Shand & Jurs 95210 Clamping Manway Cover

Threaded-Clamp Low-Pressure Manway Cover

Get a Quote ↵

Shand & Jurs 95210 Clamping Manway Cover

For tank farm engineers, digester operators, and inspection planners, the Shand & Jurs 95210 Clamping Manway Cover provides secure, gas-tight, and watertight personnel access to low-pressure storage tanks, digesters, and process vessels, combining frequent inspection access with consistent vapor containment.

Unlike unsealed manway covers that rely on gasket compression from a full bolt pattern and drift toward leakage as bolts loosen or seals age, the 95210 uses a threaded clamping mechanism that applies uniform compression to a flexible elastomer seal, maintaining reliable closure at approximately 1–3 PSIG working pressure.

A hinged cover configuration allows rapid, unobstructed access for inspection and maintenance without removing the cover from the tank. Optional non-ferrous clamping hardware in bronze, brass, or stainless steel provides spark-resistant performance in flammable product service.

Available in 16″ through 48″ sizes with flat-face drilled flanges to ANSI, API, or EN standards, the 95210 integrates with common tank nozzle configurations and supports petroleum, chemical, and industrial storage where secure closure and personnel access must coexist.

Shand & Jurs 95210 Clamping Manway Cover
Shand & Jurs 95210 Clamping Manway Cover
02

Features

Threaded Clamping Mechanism

Provides uniform seal compression for gas-tight and watertight closure, avoiding the loosening and drift that bolt-pattern covers develop over service life.

Hinged Cover Assembly

Enables rapid, unobstructed access for inspection and maintenance without removing the cover from the tank during routine service events.

Flexible Elastomer Seal

Maintains consistent compression and reseating performance under low internal pressures, delivering stable containment across repeated open-close cycles.

Multiple Diameter Availability

Sizes from 16″ to 48″ accommodate standard tank and vessel manway openings across petroleum, chemical, and digester storage architectures.

Flat-Face Drilled Flange

Supports ANSI, API, or EN bolt patterns, giving installation flexibility across regional tank-construction standards without custom nozzle adaptation.

Non-Ferrous Hardware Option

Bronze, brass, or stainless clamping hardware reduces spark risk in hazardous environments where flammable vapor and metallic impact could otherwise coincide.

Applications

  • Storage Tank Access: Personnel entry and inspection access on low-pressure atmospheric storage tanks where secure vapor containment and repeatable sealing both matter between entries.
  • Digester Inspection: Manway access on anaerobic digesters and biogas vessels where vapor-tight sealing protects operators and limits fugitive methane release.
  • Product Sampling: Larger-diameter sampling access on tanks where a standard gauge hatch is insufficient and a full manway is required for sampling apparatus or inspection tooling.
  • Floating Roof Maintenance: Access ports for floating roof seal inspection, leg maintenance, and routine roof service where a reliable low-pressure seal is required after each entry.
  • Low-Pressure Vessels: Process vessels operating at approximately 1–3 PSIG where personnel entry and consistent vapor containment must coexist across the service life of the vessel.
  • Terminal Tank Farms: Petroleum, chemical, and industrial storage tanks where frequent inspection and maintenance access cannot be allowed to compromise emissions performance.
03

Specifications

Parameter

Specification

Function

Clamping access cover for low-pressure tanks and vessels

Standard Sizes

16″, 18″, 20″, 24″, 30″, 36″, 42″, 48″

Working Pressure

Approximately 1–3 psig (size dependent)

Sealing Method

Threaded clamping compression with elastomer seal

Opening Mechanism

Hinged manual cover

Flange Type

Flat-face drilled per ANSI / API / EN

Body Materials

Aluminum, Carbon Steel, 316 Stainless Steel

Seal Materials

NBR (Nitrile), CR (Chloroprene)

Clamping Hardware

Steel, Brass, Bronze, Stainless Steel

Certifications

ATEX available

Temperature Range

Dependent on seal selection; typically −20°F to 250°F (seal dependent)

Options

Body material selection; elastomer seal selection (NBR or CR); clamping hardware material; ANSI/API/EN flange drilling; undrilled flange version; ATEX configuration

Contact Support
2026 COST ESTIMATE

Contact Support

If you have questions not covered here, please contact the Cognesense support team for assistance.

Contact Us ↵

Why use a clamping manway cover instead of a conventional bolted cover?

−

A bolted manway cover depends on the full bolt pattern applying even gasket compression, and both the bolt torque and the gasket drift over repeated open-close cycles. The 95210 uses a threaded clamping mechanism that applies uniform compression to a flexible elastomer seal, maintaining consistent gas-tight and watertight closure across inspection cycles without the drift of a multi-bolt pattern.

What working pressure can the 95210 seal against?

+

Standard working pressure capability ranges from approximately 1 to 3 PSIG depending on size, supporting low-pressure storage tanks, digesters, and process vessels where secure closure and personnel access must coexist.

Which sizes and flange patterns are available?

+

The 95210 is offered in 16″, 18″, 20″, 24″, 30″, 36″, 42″, and 48″ nominal diameters with flat-face drilled flanges to ANSI, API, or EN standards. An undrilled flange version is available for custom bolt patterns where a project specification requires non-standard drilling.

Is the 95210 suitable for flammable product service?

+

Yes. Non-ferrous clamping hardware in bronze, brass, or stainless steel is available to reduce spark risk in flammable vapor environments, and an ATEX configuration is available for hazardous area applications where the site classification requires it.

Which elastomer and body material combinations are available?

+

Bodies are offered in aluminum, carbon steel, or 316 stainless steel. Seals are available in NBR (nitrile) or CR (chloroprene) for product compatibility. Temperature capability is seal-dependent and typically covers roughly −20°F to 250°F; specify stored product and service conditions at time of order.

Where is the 95210 typically installed on a tank?

+

Installation is on existing manway nozzles where personnel entry and inspection access are required — storage tank roofs and shells, digester tops, floating roof access ports, and low-pressure process vessels. Flat-face drilled flanges match common ANSI, API, and EN nozzle patterns.

Summary

With over a century of tank-safety heritage inside Cognesense, the Shand & Jurs 95210 Clamping Manway Cover is chosen when low-pressure tanks, digesters, and process vessels require frequent inspection access without giving up vapor or weather-tight closure. Its threaded clamping mechanism, flexible elastomer seal, and hinged cover configuration maintain consistent gas-tight and watertight sealing across repeated open-close cycles. For petroleum, chemical, and industrial storage, the 95210 is trusted wherever you need to measure, monitor, and protect what matters most.

Bottom section image
Measure.
Monitor.
Protect.